| Event ⇕ | Date ⇕ | |
|---|---|---|
| Train The Fit Tester – October 24 (Saturday) – Guildford | October 24, 2026 8:30 am | Register |
Empower your workplace with proper respirator fit testing standards through our Train the Fit Tester (TFT) certification. This focused 4-hour training ensures you understand legislation, CSA standards, and best practices to conduct accurate, compliant respirator fit tests.
Course Overview
Gain practical skills and regulatory insight, including:
- Responsibilities and roles within a respiratory protection program
- Core elements of respiratory programs per CSA Z94.4-02
- Identifying respiratory hazards and recognizing when respirators are required
- Selecting respirators and distinguishing filters from cartridges
- Conducting fit tests on diverse respirator types
- Performing seal checks before each use
- Proper care, maintenance, and storage protocols
- Setting up documentation systems to ensure compliance
Prerequisites
No prior training necessary. Participants should have a basic understanding of respiratory hazards and program requirements. All key training materials and support are provided.
Certification & Validity
Applicants must demonstrate proper fit test procedures and successfully pass a final exam. Once completed, you’ll receive certification valid for three years.
Duration & Venue
- Length: 4 intensive hours of hands-on instruction
- Environment: Conveniently located near BCIT, our well-equipped facility ensures comfort and effective learning.
What is Qualitative Fit Testing?
Qualitative Fit Testing (QLFT) checks if your respirator seals properly. It uses harmless test
agents (sweet Saccharin or bitter Bitrex) inside a hood.
- If you taste the solution, the mask is leaking → test fails.
- If you do not taste it, the mask fits properly → test passes.
Who Needs This Test?
- Workers who use N95 masks or half-face respirators.
- Required under CSA and WorkSafeBC regulations.
Why Mainland Safety Uses the 3M Fit Test Kit
- Trusted global standard (OSHA, CSA, HSE, ISO, AS/NZS)
- Affordable and accessible (no $30k machines required)
- Accurate for N95 and half-face respirators
- Portable for job sites and remote areas
What is Qualitative Fit Testing?
Qualitative Fit Testing (QLFT) checks if your respirator seals properly. It uses harmless test
agents (sweet Saccharin or bitter Bitrex) inside a hood.
- If you taste the solution, the mask is leaking → test fails.
- If you do not taste it, the mask fits properly → test passes.
Who Needs This Test?
- Workers who use N95 masks or half-face respirators.
- Required under CSA and WorkSafeBC regulations.
Why Mainland Safety Uses the 3M Fit Test Kit
- Trusted global standard (OSHA, CSA, HSE, ISO, AS/NZS)
- Affordable and accessible (no $30k machines required)
- Accurate for N95 and half-face respirators
- Portable for job sites and remote areas